Application cases
Explore real industrial use‑cases across furniture, flooring, foils and edgebands. Filter by segment to quickly find relevant examples.
Back-side priming of PET foil for furniture lamination
Furniture foils are glued to MDF or wood with PU adhesives, and the back of a PET foil bonds as badly as the front. Duoprime® PET primes both sides with one product.
Direct UV printing on standard PET film
UV inks do not stick to untreated PET. Duoprime® PET lets you buy standard film and add the adhesion in your own line — then print straight onto it, today or months later.
Running 1–3 g/m²: a stable process once it is set up
Coaters are used to 10–15 g/m² of primer, and 1–3 g/m² sounds like something that needs constant attention. It does not: the amount is set by the roller and the primer’s own viscosity, settles at around 1.5 g/m² and stays there.
Water-borne activation of melamine panels
Some lines and some certifications call for a water-borne primer. Duoprime® MW is the water-borne melamine activator: 0% VOC, no isocyanates, no IR dryer needed — and digital print can go straight onto the activated surface.
Decor foils on PET and polyolefin
Covalent adhesion on standard PET and PP foils with a one-component UV primer — no pre-treated film, no 2K primer, no isocyanates. Lacquer or print directly, in-line or later.
Premium super-matte and high-gloss fronts on melamine-faced MDF
A thinner super-matte or high-gloss system for kitchen fronts and horizontal surfaces: Duoprime® M activates the melamine so the base coat bonds directly — better scratch resistance and machining, less coating, the same high-end look.
Thin, low-cost matte finish on melamine-faced panels
A thin, inexpensive super-matte finish for smooth or structured melamine-faced particle board: 1 g/m² of Duoprime® M, a lighter base coat and an excimer top — 20–60 g/m² in total.